/*
 * @author zz85
 *
 * Experimenting of primitive geometry creation using Surface Parametric equations
 *
 */


THREE.ParametricGeometries = {

	klein: function (v, u) {
		u *= Math.PI;
		v *= 2 * Math.PI;

		u = u * 2;
		var x, y, z;
		if (u < Math.PI) {
			x = 3 * Math.cos(u) * (1 + Math.sin(u)) + (2 * (1 - Math.cos(u) / 2)) * Math.cos(u) * Math.cos(v);
			z = -8 * Math.sin(u) - 2 * (1 - Math.cos(u) / 2) * Math.sin(u) * Math.cos(v);
		} else {
			x = 3 * Math.cos(u) * (1 + Math.sin(u)) + (2 * (1 - Math.cos(u) / 2)) * Math.cos(v + Math.PI);
			z = -8 * Math.sin(u);
		}

		y = -2 * (1 - Math.cos(u) / 2) * Math.sin(v);

		return new THREE.Vector3(x, y, z);
	},

	plane: function (width, height) {

		return function(u, v) {
			var x = u * width;
			var y = 0;
			var z = v * height;

			return new THREE.Vector3(x, y, z);
		};
	},

	mobius: function(u, t) {

		// flat mobius strip
		// http://www.wolframalpha.com/input/?i=M%C3%B6bius+strip+parametric+equations&lk=1&a=ClashPrefs_*Surface.MoebiusStrip.SurfaceProperty.ParametricEquations-
		u = u - 0.5;
		var v = 2 * Math.PI * t;

		var x, y, z;

		var a = 2;
		x = Math.cos(v) * (a + u * Math.cos(v / 2));
		y = Math.sin(v) * (a + u * Math.cos(v / 2));
		z = u * Math.sin(v / 2);
		return new THREE.Vector3(x, y, z);

	},

	mobius3d: function(u, t) {

		// volumetric mobius strip
		u *= Math.PI;
		t *= 2 * Math.PI;

		u = u * 2;
		var phi = u / 2;
		var major = 2.25, a = 0.125, b = 0.65;
		var x, y, z;
		x = a * Math.cos(t) * Math.cos(phi) - b * Math.sin(t) * Math.sin(phi);
		z = a * Math.cos(t) * Math.sin(phi) + b * Math.sin(t) * Math.cos(phi);
		y = (major + x) * Math.sin(u);
		x = (major + x) * Math.cos(u);
		return new THREE.Vector3(x, y, z);
	}

};


/*********************************************
 *
 * Parametric Replacement for TubeGeometry
 *
 *********************************************/

THREE.ParametricGeometries.TubeGeometry = function(path, segments, radius, segmentsRadius, closed, debug) {

	this.path = path;
	this.segments = segments || 64;
	this.radius = radius || 1;
	this.segmentsRadius = segmentsRadius || 8;
	this.closed = closed || false;
	if (debug) this.debug = new THREE.Object3D();


	var scope = this,

		tangent, normal, binormal,

		numpoints = this.segments + 1,

		x, y, z, tx, ty, tz, u, v,

		cx, cy, pos, pos2 = new THREE.Vector3(),
		i, j, ip, jp, a, b, c, d, uva, uvb, uvc, uvd;

	var frames = new THREE.TubeGeometry.FrenetFrames(path, segments, closed),
		tangents = frames.tangents,
		normals = frames.normals,
		binormals = frames.binormals;

		// proxy internals
	this.tangents = tangents;
	this.normals = normals;
	this.binormals = binormals;



	var ParametricTube = function(u, v) {
		v *= 2 * Math.PI;

		i = u * (numpoints - 1);
		i = Math.floor(i);

		pos = path.getPointAt(u);

		tangent = tangents[i];
		normal = normals[i];
		binormal = binormals[i];

		if (scope.debug) {

			scope.debug.add(new THREE.ArrowHelper(tangent, pos, radius, 0x0000ff));
			scope.debug.add(new THREE.ArrowHelper(normal, pos, radius, 0xff0000));
			scope.debug.add(new THREE.ArrowHelper(binormal, pos, radius, 0x00ff00));

		}

		cx = -scope.radius * Math.cos(v); // TODO: Hack: Negating it so it faces outside.
		cy = scope.radius * Math.sin(v);

		pos2.copy(pos);
		pos2.x += cx * normal.x + cy * binormal.x;
		pos2.y += cx * normal.y + cy * binormal.y;
		pos2.z += cx * normal.z + cy * binormal.z;

		return pos2.clone();
	};

	THREE.ParametricGeometry.call(this, ParametricTube, segments, segmentsRadius);

};

THREE.ParametricGeometries.TubeGeometry.prototype = Object.create( THREE.Geometry.prototype );
THREE.ParametricGeometries.TubeGeometry.prototype.constructor = THREE.ParametricGeometries.TubeGeometry;


 /*********************************************
  *
  * Parametric Replacement for TorusKnotGeometry
  *
  *********************************************/
THREE.ParametricGeometries.TorusKnotGeometry = function ( radius, tube, segmentsR, segmentsT, p, q, heightScale ) {

	var scope = this;

	this.radius = radius || 200;
	this.tube = tube || 40;
	this.segmentsR = segmentsR || 64;
	this.segmentsT = segmentsT || 8;
	this.p = p || 2;
	this.q = q || 3;
	this.heightScale = heightScale || 1;


	var TorusKnotCurve = THREE.Curve.create(

		function() {
		},

		function(t) {

			t *= Math.PI * 2;

			var r = 0.5;

			var tx = (1 + r * Math.cos(q * t)) * Math.cos(p * t),
				ty = (1 + r * Math.cos(q * t)) * Math.sin(p * t),
				tz = r * Math.sin(q * t);

			return new THREE.Vector3(tx, ty * heightScale, tz).multiplyScalar(radius);

		}

	);
	var segments = segmentsR;
	var radiusSegments = segmentsT;
	var extrudePath = new TorusKnotCurve();

	THREE.ParametricGeometries.TubeGeometry.call( this, extrudePath, segments, tube, radiusSegments, true, false );


};

THREE.ParametricGeometries.TorusKnotGeometry.prototype = Object.create( THREE.Geometry.prototype );
THREE.ParametricGeometries.TorusKnotGeometry.prototype.constructor = THREE.ParametricGeometries.TorusKnotGeometry;


 /*********************************************
  *
  * Parametric Replacement for SphereGeometry
  *
  *********************************************/
THREE.ParametricGeometries.SphereGeometry = function(size, u, v) {

	function sphere(u, v) {
		u *= Math.PI;
		v *= 2 * Math.PI;

		var x = size * Math.sin(u) * Math.cos(v);
		var y = size * Math.sin(u) * Math.sin(v);
		var z = size * Math.cos(u);


		return new THREE.Vector3(x, y, z);
	}

	THREE.ParametricGeometry.call(this, sphere, u, v, !true);

};

THREE.ParametricGeometries.SphereGeometry.prototype = Object.create( THREE.Geometry.prototype );
THREE.ParametricGeometries.SphereGeometry.prototype.constructor = THREE.ParametricGeometries.SphereGeometry;


 /*********************************************
  *
  * Parametric Replacement for PlaneGeometry
  *
  *********************************************/

THREE.ParametricGeometries.PlaneGeometry = function(width, depth, segmentsWidth, segmentsDepth) {

	function plane(u, v) {

		var x = u * width;
		var y = 0;
		var z = v * depth;

		return new THREE.Vector3(x, y, z);
	}

	THREE.ParametricGeometry.call(this, plane, segmentsWidth, segmentsDepth);

};

THREE.ParametricGeometries.PlaneGeometry.prototype = Object.create( THREE.Geometry.prototype );
THREE.ParametricGeometries.PlaneGeometry.prototype.constructor = THREE.ParametricGeometries.PlaneGeometry;