<?xml version="1.0" encoding="ISO-8859-1"?>
<metadatalist>
	<metadata ReferenceType="Thesis">
		<site>mtc-m21d.sid.inpe.br 808</site>
		<holdercode>{isadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S}</holdercode>
		<identifier>8JMKD3MGP3W34T/48SDKGE</identifier>
		<repository>sid.inpe.br/mtc-m21d/2023/04.10.19.05</repository>
		<lastupdate>2023:05.16.18.53.56 urlib.net/www/2021/06.04.03.40 simone</lastupdate>
		<metadatarepository>sid.inpe.br/mtc-m21d/2023/04.10.19.05.31</metadatarepository>
		<metadatalastupdate>2023:06.07.20.51.51 sid.inpe.br/bibdigital@80/2006/04.07.15.50 administrator</metadatalastupdate>
		<secondarykey>INPE-18682-TDI/3306</secondarykey>
		<citationkey>Almeida:2023:AnPrTr</citationkey>
		<title>Análise das propriedades tribológicas de revestimentos de óxido de alumínio produzidos por anodização sulfúrica da liga AA6061</title>
		<alternatetitle>Analysis of the tribological properties of aluminum oxide coatings produced by sulfuric anodization of alloy AA6061</alternatetitle>
		<course>CMS-ETES-DIPGR-INPE-MCTI-GOV-BR</course>
		<year>2023</year>
		<date>2023-03-30</date>
		<thesistype>Dissertação (Mestrado em Ciência e Tecnologia de Materiais e Sensores)</thesistype>
		<secondarytype>TDI</secondarytype>
		<numberofpages>94</numberofpages>
		<numberoffiles>2</numberoffiles>
		<size>8272 KiB</size>
		<author>Almeida, Andréia Larissa Alves de,</author>
		<committee>Mello, Carina Barros (presidente/orientadora),</committee>
		<committee>Savonov, Graziela da Silva (orientadora),</committee>
		<committee>Mineiro, Sergio Luiz,</committee>
		<committee>Gonçalves, Polyana Alves Radi Gonçalves,</committee>
		<e-mailaddress>andreialarissa11@gmail.com</e-mailaddress>
		<university>Instituto Nacional de Pesquisas Espaciais (INPE)</university>
		<city>São José dos Campos</city>
		<transferableflag>1</transferableflag>
		<keywords>tribologia, anodização, ligas de alumínio, AA6061, tribology, anodizing, aluminum alloys.</keywords>
		<abstract>O processo de anodização é um dos tratamentos de superfícies mais práticos e com melhor custo/benefício, sendo um procedimento amplamente usado para aumentar a resistência ao desgaste e a dureza de ligas de alumínio, como a AA6061. A anodização foi realizada com o intuito de avaliar as propriedades tribológicas e mecânicas do material com o tratamento superficial em relação a liga sem tratamento. Neste estudo, a anodização foi realizada com tempo constante, variando a densidade de corrente e a concentração de eletrólito. Para caracterizar o filme obtido, utilizou-se o microscópio eletrônico de varredura (MEV), o perfilômetro óptico, o perfilômetro mecânico e difratômetro de raios X. A dureza, o comportamento tribológico, a esclerometria e a adesão do revestimento foram avaliados. Os resultados revelaram que quanto maior a densidade de corrente e quanto maior a concentração do eletrólito, mais espesso é o revestimento e que a rugosidade aumenta com o acréscimo da densidade de corrente. Os revestimentos que apresentaram maior homogeneidade na formação dos poros obtiveram menores valores de dureza. Todos os revestimentos produzidos apresentaram falhas dentro das aceitáveis de acordo com a norma VDI 3198. Em relação ao ensaio de esclerometria, observou-se que as amostras anodizadas com maior densidade de corrente obtiveram maiores valores de carga crítica. No caso da resistência ao desgaste, as amostras anodizadas com maior concentração do eletrólito mostraram um melhor desempenho em relação às outras. ABSTRACT: The anodizing process is one of the most practical and cost-effective surface treatments and is widely used to increase the wear resistance and hardness of aluminum alloys such as AA6061. Anodizing was performed in order to evaluate the tribological and mechanical properties of the material with surface treatment in relation to the untreated alloy. In this study, anodizing was performed with constant time, varying current density and electrolyte concentration. To characterize the obtained film, scanning electron microscope (SEM), optical profilometer, mechanical profilometer and X-ray diffractometer were used. Hardness, tribological behavior, sclerometry and coating adhesion were evaluated. The results revealed that the higher the current density and the higher the electrolyte concentration, the thicker the coating and that the roughness increases with the increase in current density. The coatings that showed greater homogeneity in pore formation had lower hardness values. All the coatings produced showed failures within acceptable limits according to the VDI 3198 standard. Regarding the sclerometry test, it was observed that the anodized samples with higher current density obtained higher critical load values. In the case of wear resistance, the anodized samples with a higher electrolyte concentration showed a better performance in relation to the others.</abstract>
		<area>ETES</area>
		<language>pt</language>
		<targetfile>publicacao.pdf</targetfile>
		<usergroup>andreia.almeida@inpe.br</usergroup>
		<usergroup>pubtc@inpe.br</usergroup>
		<usergroup>simone</usergroup>
		<visibility>shown</visibility>
		<copyright>urlib.net/www/2012/11.12.15.10</copyright>
		<rightsholder>originalauthor yes</rightsholder>
		<readpermission>allow from all</readpermission>
		<documentstage>not transferred</documentstage>
		<mirrorrepository>urlib.net/www/2021/06.04.03.40.25</mirrorrepository>
		<nexthigherunit>8JMKD3MGPCW/3F358GL</nexthigherunit>
		<nexthigherunit>8JMKD3MGPCW/46KTFK8</nexthigherunit>
		<nexthigherunit>8JMKD3MGPCW/46KUES5</nexthigherunit>
		<hostcollection>urlib.net/www/2021/06.04.03.40</hostcollection>
		<agreement>autorizacao.pdf .htaccess .htaccess2</agreement>
		<supervisor>Savonov, Graziela da Silva,</supervisor>
		<supervisor>Mello, Carina Barros,</supervisor>
		<url>http://mtc-m21d.sid.inpe.br/rep-/sid.inpe.br/mtc-m21d/2023/04.10.19.05</url>
	</metadata>
</metadatalist>